9
Refrigerator Door
1. Place the refrigerator door onto the center hinge pin.
2. Using the hex key and the internal hex head screw, removed
earlier, fasten the top hinge to the top of the refrigerator door.
3. Reinstall the hinge hole plug on the opposite side of the
refrigerator door.
Final Steps
1. Check all holes to make sure that hole plugs and screws are in
place and are fully tightened.
2. Plug into a grounded 3 prong outlet.
3. Return all removable door parts to door and food to
refrigerator.
Install Door Handles
(on some models)
On some models the door handles are factory-installed. If your
refrigerator does not have factory-installed handles, see the
following instructions.
IMPORTANT: If you want to reverse the direction of the door
swing, so that the freezer and refrigerator doors open from the
opposite side, see “Reverse Door Swing” before installing the
door handles.
Parts Supplied: The door handles are packed inside the freezer
compartment, and the Reversibility kit containing the screws and
hole plugs is in the crisper drawer in the refrigerator compartment.
Gather the required tools.
Tools Needed: Phillips screwdriver
Install Handles
1. Remove the door handles from the packaging. Remove the
screws and hole plugs from the Reversibility Kit.
2. Using the screws, fasten the handles to the doors.
3. Insert the handle plugs to cover the screws.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Parts
Location
■
Door handles (2)
Freezer compartment
■
Handle screws (4)
Crisper drawer
■
Handle plugs (4)
Crisper drawer
A. Handle plugs
B. Handle screws
B
B
A
A
A
