4-5
14. Remove the screw from the right side of
the water recirculation pump cover. Grasp
the drain hose at the bottom of the cover,
then pull down and forward, and remove
the cover from the unit.
15. Remove the six screws from the rear chan-
nel cover and remove the cover from the
ice maker.
Water Recirculation
Pump Cover
Screw
Rear
Channel
Cover
Screw (1 0f 6)
19. Remove the four evaporator screws and
the four ice making housing screws.
Ice Making Housing
Screw (1 of 4)
Drain Hose
Evaporator Screw (1 of 4)
16. Disconnect the recirculation pump 3-wire
connector.
17. Cut the indicated wire tie.
18. Remove the green ground wire screw.
Ground Screw
Cut Wire Tie
3-Wire Connector
Continued on the next page.
Summary of Contents for KAR-13
