7
Clock
This is a 12-hour clock.
To Set:
1. Touch and hold SELECT pad for 5 seconds.
“12:00” will appear in the display, with the hour (12) flashing.
If you are changing the time, the current set time will appear,
with the hour flashing.
2. Turn the dial to set the hour.
3. Touch SELECT or START.
The “minutes” digits will flash in the display.
4. Turn the dial to set the minutes.
5. Touch SELECT or START to complete the setting.
To Cancel Clock:
1. Touch and hold SELECT pad for 5 seconds.
The clock-setting display will show.
2. Touch CANCEL/OFF.
The “:” will appear in the display.
The next time the clock is set, “12:00” will appear in the display
when the clock-setting mode is entered.
Tones
Tones are audible signals, indicating the following:
One tone
■
Valid entry (short tone)
Two tones
■
Reminder, repeat each minute after the end-of-cycle tones
■
Hidden feature has been entered or exited
Three tones
■
Invalid entry
Four tones
■
End of cycle
■
End of warming cycle
■
Between cooking cycle and warming cycle
Fifteen tones
■
Error
The tones cannot be turned off, and the volume cannot be
changed.
Demo Mode
The Demo Mode is ideal for learning how to use the microwave
oven. When set, functions can be entered without actually turning
on the magnetron. The microwave oven light will come on, the
fan will run, and the turntable will rotate. When the microwave
oven is turned on while in Demo Mode, “no” and then “HEAt” will
appear in the display.
To Turn On/Off: The microwave oven must be off. Open the door,
then touch and hold COOK for 5 seconds. Three short tones will
sound. Repeat to exit Demo Mode.
Control Lock
The Control Lock shuts down the control panel pads to avoid
unintended use of the microwave oven.
When the control panel is locked, none of the controls will
function. If a control pad is touched, “LOC” will appear in the
display and invalid entry tones will sound.
To Lock/Unlock Control: Before locking, make sure the
microwave oven is off. Touch and hold CANCEL/OFF for
5 seconds until 2 tones sound. Repeat to unlock the controls.
Cooling Fan
Depending on the length of the cooking cycle, the cooling fan
may continue to run after that cycle has ended. This is normal,
and helps eliminate moisture that may accumulate inside the
microwave oven before the door is opened.
While the fan is running, “COOL” will appear in the display. The
fan will turn off automatically.
