7
4.
Drill two
¹⁄₈
" (3.0 mm) holes that correspond to the bracket
holes of the determined mounting method. See below.
Floor Mounting
Wall Mounting
5.
Using the Phillips screwdriver, mount anti-tip bracket to the
wall or floor with the two #12 x 1
⁵⁄₈
" screws provided.
Electrical Connection - U.S.A. Only
Power Supply Cord
Direct Wire
1.
Disconnect power.
2.
Use Phillips screwdriver to remove the terminal block cover
screw located on the back of the range.
3.
Remove plastic tag holding three 10-32 hex nuts from the
middle post of the terminal block.
A. #12 x 1
⁵⁄₈
" screws
B. Anti-tip bracket
A
B
A. #12 x 1
⁵⁄₈
" screws
B. Anti-tip bracket
A
B
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
