background image

Summary of Contents for KESO-140S

Page 1: ...a fuse or circuit breaker with approved rating 0 3 All connections made in accordance with local and or National Electrical Code OPERATIONAL 0 1 Oven racks installed and slide freely in all positions 0 2 Knobs securely in place and rotate freely without rubbing edges of control panel glass holes 0 3 All lights function properly 0 4 Clock timer buzzer operates 0 5 Doors properly adjusted open and c...

Page 2: ...ening to support the oven The front of the cabinet must be at right angles to the supports as well as level If the oven is not installed level it will not cook properly 23 to inside of cabinet back mm a l 31 to top of oven support I 23 to inside of cabinet back 1 em_ 11 to top of oven sumort 1 2 1 MIN to upper cab doors z I I I I 28 I I I I I 36 31 I A MIN A MIN l 8 MIN to lower to lower cab doors...

Page 3: ...of damage to the front of the unit and the bottom of the front frame Prior to installation test the electrical service to assure that it agrees with the specrfrcations on the oven data plate Remove all cords tape and wire used to hold various parts in position during shipment Remove oven racks from the inside of the oven and put to one side while oven is being installed in cabinet Take broiler pan...

Page 4: ...See Fig 2 Tighten screws to hold to front frame Secure oven to cabinet with 8 flat head screws supplied with oven Disregard any excess screws B Replace Oven Racks in Oven Cavity C Reinstall The Door s See Fig 1 1 Slide door hinge arms until firmly seated 2 Lower door to full open position 3 Push finger tabs to back Depress the tabs and slide forward 4 Close and reopen door slowly to make sure it h...

Reviews: