10
OVEN USE
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to the
fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well-
ventilated room.
Electronic Oven Controls
Control Display
The display will light up when first powered up or after a power
loss. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
■
Valid keypad press.
■
Oven is preheated (long tone).
■
Kitchen timer (long tone with reminder tone every 60 seconds).
■
Function has been entered.
Three Tones
■
Invalid keypad press.
Four Tones
■
End of cycle (with reminder tone every 60 seconds).
Use the Options keypad to change the tone settings.
Options
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Options
keypad.
Use the Options keypad to scroll through the features that can be
changed. Each press of the Options keypad will advance the
display to the next setting. After selecting the feature to be
changed, the control will prompt you for the required input. Details
of all of the feature changes are explained in the following sections.
Press OFF UPPER or OFF LOWER to exit Options.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but can be changed to
Celsius.
1. Press OPTIONS until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones.
1. Press OPTIONS until “SOUND” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press OPTIONS until “SOUND VOLUME” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press OPTIONS until “END TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press OPTIONS until “KEYPRESS TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end of cycle tones.
1. Press OPTIONS until “REMINDER TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
12/24 Hour Clock
1. Press OPTIONS until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120 V power connection and permits the control features to be
demonstrated without heating elements or burners turning on. If
this feature is activated, the oven will not work.
1. Press OPTIONS until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
