7
Floor Mounting
Wall Mounting
5.
Using two #12 x 1
⁵⁄₈
" Phillips-head screws provided, mount
anti-tip bracket to the wall or floor.
6.
Move range close enough to opening to allow for final
electrical connections. Remove shipping base, cardboard or
hardboard from under range.
7.
Move range into its final location, making sure rear leveling
leg slides into anti-tip bracket.
8.
Move range forward onto shipping base, cardboard or
hardboard to continue installing the range using the following
installation instructions.
Rear position
Front position
Diagonal (2 options)
