9
English
aSSEMblINg ThE FOOd PROCESSOR
aSSEMblINg ThE FOOd PROCESSOR
attaching the wor_k bowl cover_
NOTE: Be sure to install the desired accessory before attaching the work bowl cover.
1
Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.
2
Fit the food pusher into the 3-in-1
feed tube. See “Using the 3-in-1 Feed
Tube” for details on working with
different sized foods.
NOTE: Your Food Processor will not operate unless the work bowl and work bowl cover
are properly locked on the base, and the large pusher is inserted to the maximum fill line on
the feed tube (approximately halfway down).
Installing the adjustable slicing disc
1
Holding the adjustable slicing disc, twist
the ridged portion of the shaft clockwise
for thinner slices, or counterclockwise
for thicker slices.
2
Hold the slicing disk by the finger grips
and lower it onto the drive adapter.
You may need to turn the disc/drive
adapter until it drops down into place.
The adjustable slicing disc is easily adjusted and makes slicing tasks simple.
Finger_ gr_ips
3
Install the work bowl cover, being sure
it locks into place.
