8
ENGLISH
Preparing the Food Processor for Use
4. Insert the desired accessory into the
work bowl. See blade or disc assembly
instructions.
5. Place the work bowl cover on the
work bowl with the feed tube just
to the left of the work bowl handle.
Grasp the feed tube and turn the
cover to the right until it locks
into place.
NOTE:
Do not attach the cover to the
work bowl before the work bowl is locked
on the base. Damage to the work bowl
may result.
6. Fit the food pusher into the feed tube.
7. Plug the power cord into an electrical
outlet.
NOTE:
Your Food Processor will not
operate unless the work bowl and work
bowl cover are properly locked on
the base.
Do not remove the work bowl from
the base without first removing the work
bowl cover. Damage to the work bowl
may result.
Multipurpose Blade and
Dough Blade Assembly
1. Place the blade on the power shaft.
2. Rotate the blade so it falls into place
on the shaft.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
250
8
0.4
200
6
0.3
150
4
0.2
100
2
0.1
50
ml
oz
pts
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
Fire Hazard
Do not use an extension cord.
Doing so can result in death,
or fire.
WARNING
