9
Troubleshooting
•
Check that the electricity supply has not been shut off�
•
If you are unable to turn the hob off after using it, disconnect it from the power supply�
•
If alphanumeric codes appear on the display when the hob is switched on, consult the following
table for instructions�
Please note: The presence of water, liquid spilled from pots or any objects resting on any of the hob
buttons can accidentally activate or deactivate the control panel lock function�
ERROR CODE
DESCRIPTION
POSSIBLE CAUSE
SOLUTION
C81, C82
The control panel switches
off because of excessively
high temperatures�
The internal temperature of
electronic parts is too high�
Wait for the hob to cool
down before using it again�
F02, F04
The connection voltage is
wrong�
The sensor detects a
discrepancy between the
appliance voltage and that of
the mains supply�
Disconnect the hob from
the mains and check the
electrical connection�
F01, F06, F12,
F13, F25, F34,
F35, F36, F37,
F41, F47, F58,
F61, F76
Disconnect the hob from the power supply� Wait a few seconds then reconnect the hob to
the power supply� If the problem persists, call the service centre and specify the error code
that appears on the display�
Maintenance and cleaning
!
WARNING
•
Do not use steam cleaning equipment.
•
Before cleaning, make sure the cooking zones are switched off and that the
residual heat indicator (“H”) is not displayed.
Important:
•
Do not use abrasive sponges or scouring pads as they may damage the glass�
•
After each use, clean the hob (when it is cool) to remove any deposits and stains from food residue�
•
Sugar or foods with a high sugar content can damage the hob and must be immediately removed�
•
Salt, sugar and sand could scratch the glass surface�
•
Use a soft cloth, absorbent kitchen paper or a special hob cleaner (follow the Manufacturer’s
instructions)�
•
Spills of liquid in the cooking zones can cause the pots to move or vibrate�
•
After cleaning the hob, dry thoroughly�
The hob has been treated with a finish that makes it easy to clean and keeps the surface shiny for a long
time�
To clean Kitchenaid hobs, follow these recommendations:
• Use a soft cloth (microfibre is best) dampened with water or with everyday glass cleaning detergent.
•
For best results, leave a wet cloth on the glass hob surface for a few minutes�
Summary of Contents for KHIMS 36500
Page 2: ...Index EN page 3 ...
Page 11: ...11 ...
