12
| USING THE STAND MIXER
USING THE STAND MIXER
4
To remove accessory:
Repeat steps 1
and 2� Press accessory upward
as far as possible and turn to the
left� Then pull accessory from the
beater shaft�
2
Hold the locking lever in the unlock
position and tilt motor head back�
3
Slip accessory onto beater shaft and
press upward as far as possible� Then,
turn accessory to the right, hooking
accessory over the pin on the shaft�
W11256121A.indd 12
14/06/2018 15:29:26