English
11
USING THE PRECISE HEAT MIXING BOWL
USING THE PRECISE HEAT MIXING BOWL
Preheating In Temper
3
To set the timer, press TEMPERATURE/
TIME selection toggle button once.
While the hour position flashes, turn the
TEMPERATURE/TIME selection toggle
button to set your desired time.
Preheating In Temper
4
Repeat step 3 to set the minutes. (Time
can be selected in 1 minute increments
up to 1 hour. Times longer than 1 hour
are selected in 15 minute increments.)
Preheating
In Temper
5
When the time and temperature
are programmed, press the START/
CANCEL button. “Preheating” will
display. When the desired temperature
has been reached, a tone will sound 3
times and the timer will start to count
down.
6
Put ingredients into the stainless steel
bowl. Be sure not to fill past the “Max
fill” line. If desired, place the lid on
the bowl. The lid is used at higher
temperatures to maintain consistent
heat within the stainless steel bowl.
NOTE: To program the temperature
without programming the timer, press the
START/CANCEL button immediately after
programming the temperature.
NOTE: When using the Precise Heat Mixing
Bowl by itself, place it on a flat, level surface.
The lid may be used at any time when using
without the Stand Mixer.
W10719715A_EN-Final.indd 11
11/18/14 1:21 PM
