4
INSTALLATION
The appliance must be handled and installed by two or more
persons - risk of injury.
Use protective gloves to unpack and install - risk of cuts.
Installation, including water supply (if any), electrical
connections and repairs must be carried out by a qualified
technician. Do not repair or replace any part of the appliance
unless specifically stated in the user manual. Keep children away
from the installation site. After unpacking the appliance, make
sure that it has not been damaged during transport. In the
event of problems, contact the dealer or your nearest After-sales
Service. Once installed, packaging waste (plastic, styrofoam
parts etc.) must be stored out of reach of children - risk of
suffocation. The appliance must be disconnected from the
power supply before any installation operation - risk of electrical
shock. During installation, make sure the appliance does not
damage the power cable - risk of fire or electrical shock.
Only activate the appliance when the installation has been
completed.
ELECTRICAL WARNINGS
It must be possible to disconnect the appliance from
the power supply by unplugging it if plug is accessible, or
by a multi-pole switch installed upstream of the socket in
accordance with the wiring rules and the appliance must be
earthed in conformity with national electrical safety standards.
Do not use extension leads, multiple sockets or adapters.
The electrical components must not be accessible to the user
after installation. Do not use the appliance when you are wet
or barefoot. Do not operate this appliance if it has a damaged
power cable or plug, if it is not working properly, or if it has
been damaged or dropped.
If the supply cord is damaged, it must be replaced with an
identical one by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard - risk of electrical
shock.
