2
INSTALLATION INSTRUCTIONS
Tools and Parts
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Parts Supplied
Minimum Cutout Dimensions
Trim Kit Frame Dimensions
*For installation over 27" (68.6 cm) built-in oven
**For installation over 30" (76.2 cm) built-in oven
Electrical Requirements
Observe all governing codes and ordinances.
Required:
■
A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply
with a fuse or circuit breaker.
■
Measuring tape
■
Pencil
■
Scissors
■
Phillips screwdriver
■
5/64" drill
A. Trim kit frame
B. Side duct (1)
C. Upper duct (1)
D. Bottom duct (1)
E. Template
F. 1" screws (4, plus 2 extra)
G. 1/2" screws (11, plus 2 extra)
H. Anti-tip bracket (1)
I. Bottom bracket (1)
A. Depth
B. Width
A
B
C
D
E
F
G
H
I
Width
Width
16
³⁄₄
"
(42.55 cm)
3"
(7.6 cm)
A
B
OVER 27" (68.6 CM)
BUILT-IN OVEN
OVER 30" (76.2 CM)
BUILT-IN OVEN
Depth
21" (53.34 cm) min. with flush mount receptacle;
22
³⁄₄
" (57.79 cm) min. without flush mount receptacle
Width
25
¹⁄₂
" (64.77 cm)
25
¹⁄₂
" (64.77 cm) min;
28
¹⁄₂
" (72.39 cm) max.
¹³⁄₁₆
"
(2.1 cm)
19
³⁄₁₆
"
(48.7 cm)
26
⁷⁄₈
" (68.2 cm)*
29
⁷⁄₈
" (75.9 cm)**
24
¹⁄₈
" (61.3 cm)
13"
(33.0 cm)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
