13
Moving the Range
When moving range, slide range onto cardboard or hardboard to
avoid damaging the floor covering.
If removing the range is necessary for cleaning or maintenance:
For power supply cord-connected ranges:
1.
Slide range forward.
2.
Unplug the power supply cord.
3.
Complete cleaning or maintenance.
4.
Plug power supply cord into a grounded outlet.
5.
Slide range back so rear range foot is under anti-tip bracket.
6.
Refer to the “Verify Anti-Tip Bracket Is Installed and
Engaged” section to verify engagement.
7.
Check that range is level.
For direct-wired ranges:
1.
Disconnect power.
2.
Slide range forward.
3.
Complete cleaning or maintenance.
4.
Slide range back so rear range foot is under anti-tip bracket.
5.
Refer to the “Verify Anti-Tip Bracket Is Installed and
Engaged” section to verify engagement.
6.
Check that range is level.
7.
Reconnect power.
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death
or serious burns to children and adults.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Summary of Contents for YKFED500ESS
Page 14: ...14 Notes ...
Page 15: ...15 Notes ...
Page 16: ...W10694065A 2014 All rights reserved 9 14 Printed in U S A ...
