OPERATING INSTRUCTIONS
Making A Bag With Bag Roll
1. Plug the appliance into a power source
2. Open the lid of the roll case and pull out enough bag material to hold an item to be vacuum
packed, plus 6 inches (See Fig 1)
3. Close and press the lid, cut from one side of the bag to the other side with the cutter until the
bag is completely cut (See Fig 2)
4. Open the lid and place one open end of the bag cutting from the roll along the sealing strip
(See Fig 3)
5. Close the lid and pull down the lock handle (See Fig 4)
6. Press the Seal button to start sealing until the sealing progress indicator lights all turn off.
7. After the sealing is completed, lift the lock handle, open the lid and take out the bag.
Vacuum packaging with a bag
1. Put the item inside the vacuum bag. Use only
approved vacuum bags.
2. Clean and straighten the other open end of the bag.
3. Place the open end of the bag into the vacuum
channel. Approximately 1/2 ways into the chamber
(See Fig 5)
4. Close the lid and lock the handle down (See Fig 6)
5. Press the Vac&Seal button, the bag will be
vacuumized and sealed automatically after
all indicator lights turn off
6. After all operations are completed,
lift the lock handle, open the lid
and take out the bag.
E4
PRESENTATION
PREPARATIONS
BEFORE OPERATIONS
OPERATING
INSTRUCTIONS
SAFETY
PRECAUTIONS
CLEANING AND MAINTENANCE
TROUBLE SHOOTING
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
