Terminal
outlet –
(black)
Charging
socket
ON/OFF Button
Terminal
(red)
Command Button
Cigarette
lighter
outlet
USB type A
outlet
Generator
port
LEDs
User Manual KiweeOne
10
LEDs:
IMPORTANT :
The LEDs can light up in different
ways. The meaning of these
different signals are explained on
page 19 and 20.
5.2.d Electrical box
Green
Yellow
Red
The terminal block, cigarette lighter and USB sockets are the outputs of the box, to which
you can connect your suitable electrical equipments. The terminal block and cigarette
lighter outputs are configurable in 12V and 24V (factory setup 12V).
If a USB device is plugged in but the generator cables are not, the box functions as a
battery and will power your USB equipment. To do this, disconnect the control and power
connectors, connect your USB, switch on the box (keep ON for 3s). If nothing is connected
to USB, the electric box is shutting off after 30s.
The generator connectors are to be connected to the generator cables for the production
of electricity and the control of unwinding / rewinding in automatic mode. The ON / OFF
and COMMAND buttons are used to control the wind turbine. The electronic box
automatically manages electricity production by seeking the optimum production.
At first start, the electrical box must be paired to the generator. See p19 how to configure
it.
