2
INTRODUCTION
Thanks for using this style stainless steel meat grinder. The appliance can be operated easier and
safer than other similar appliance.
This instruction manual gives the customer all the necessary information about the appliance and
the manufacturing standards applied, as well as all instructions for use and maintenance so that the
appliance can be used correctly maintaining its efficiency in time.
This instruction manual is for the end user and for service personnel
In order to ensure the stability and safety of the production, the appliance has passed through
dielectric voltage withstand test, earth resistance test, power leakage test and normal temperature
test before leaving factory.
IMPORTANT SAFEGUARDS
When using electrical appliances, always follow basic safety precautions including the
following:
1.
READ All NOPERATING INSTRUCTIONS AND PRODUCT SAFETY LABELS!
2.
CHECK FOR DAMAGED PARTS: Before
using the Grinder, checks that all parts are operating
properly and performing the intended functions. Check for alignment of moving parts, binding of
moving parts, mounting and any other conditions that may affect the operation. If any parts, the
Power Cord
or the
Grinder
are damaged, call the Customer Service number shown in this manual.
3.
Always unplug power cord from outlet when not in use, before putting on or taking off parts or
accessories, and before cleaning.
After unplugging the unit, turn power switch ON, then OFF to
ensure that all power has been discharged from the grinder.
4.
This appliance is NOT intended for use by children or by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge. This appliance is not
to be used by Children!
5.
NVEER LEAVE GRINDER UNATTENDED WHILE IT IS RUNNING!
6.
ALWAYS USE THE PROVIDED STOMPER, NEVER FEED FOOD BY HAND.
KEEP FINGERS CLEAR OF THE AUGER AND CUTTING BLADES AT ALL
TIMES. NEVER REACH INTO THE GRINDER,
doing so may cause serious
injury.
7.
Always keep the tray guard in place while operating(Note: tray guard is
installed on#22,#32 models only)
8.
AVOID
contact with moving parts.
NEVER USE YOUR FINGERS TO SCRAPE FOOD AWAY FROM THE
CUTTING BLADE WHILE IT IS IN OPERATION.
While the
Grinder
is in operation.
SEVERE INJURY
MAY RESULT.
9.
Wait until all moving parts have stopped and turn off power before removing any part from the
