11
3.1.4
Trolley Assembly
1)
Refer to
Figure 3-3
.
2)
Remove the Shaft Stopper Pin, Side Plate S, and Spacers from the Suspension Shaft. For beam flanges
that are wider than the standard range, different suspension shaft and/or spacer arrangements are
provided. Refer to
Table 3-1
.
3)
Insert the Suspension Shaft to Side Plate G and attach it with the Suspension Shaft Bolt, Slotted Nut and
Split Pin (cotter pin). Refer to
Figure 3-4
and ensure that correct Suspension Shaft holes are used.
Securely bend both branches of the Split Pin after insertion.
4)
Referring to
Figure 3-6
,
Table 3-1
and
Table 3-2
install the inner adjusting Spacers and Suspension Bar
on the Suspension Shaft. Use all the Spacers provided with the trolley. If the beam width is not listed in
Table 3-2
, use the next size smaller and make adjustments in accordance with
Section 3.1.5
.
5)
Place Side Plate S into the Suspension Shaft.
6)
Install the outer adjusting Spacers on the Suspension Shaft outside of Side Plate S. Insert the Shaft
Stopper Pin into Hole "A" so that Split Pin is to the left when seen from the front side of trolley switch box.
Temporarily install the split pin in the Shaft Stopper Pin and bend the split pin slightly to hold it in place.
The split pin should be fully bent after checking and attaining the proper beam flange adjustment.
7)
!
WARNING
Hole B on the suspension shaft is the hole for mounting work (temporary assembly).
Do not use the hole for the adjustment of rail width. Failure to comply with this instruction may result in
death or serious injury.
Figure 3-3
Assembling the Trolley
Summary of Contents for SMR2Q Series
