background image

7

Maintenance

Daily Inspection and Periodic Inspection

Sufficiently lubricate the load chain and idle sheave.

 

Before use, make sure that the limit switch properly works in lifting under no load.

 

Failure to follow these precautions may cause serious accidents leading to serious or even fatal injury.

DANGER

COMPULSORY

CAUTION

Use  properly  the  hoist  in  accordance  with  operational  instructions  as  carrying  out  the  daily 

 

and periodic inspections. 

Periodically lubricate the needle bearing in the idle sheave by using the grease gun through 

 

two grease nipples.

Idle sheave

Outer ring

Thrust needle bearing

Inner ring

Grease nipple

Sheave shaft

Bearing

Fasten the bolts and screws with the proper torque.

 

Failure to follow these precautions may cause serious injury or property damage.

COMPULSORY

In addition to the inspection items in the ER2 Series Electric Chain Hoist Owner's Manual (separate volume), please also 
check the Twin Hook Electric Chain Hoist on the following items for the daily and periodic inspections. With reference to 
"Criteria" of the inspection items in the ER2 Electric Chain Hoist (250kg to 5t) Owner's Manual, please turn to the points 
for the same capacity as that (total capacity) of Twin Hook Electric Chain Hoist.

Summary of Contents for TWER2









Reviews: