10
11
[...continued]
Bluetooth setup
Playing audio wirelessly
1. Follow the instructions in the ‘Pairing a Bluetooth device’ section
2. Use the controls on your device to select a track
3. To play or pause the selected track, use the controls on your device or press the Play/Pause button (15)
4. To skip a track, use the controls on your device or press the Previous Track button (13) or Next Track button (14)
5. Audio played through the connected Bluetooth device will now be heard through the speakers
6. The volume can be adjusted on both your device and the Glows. To change the volume on the Glows, press the
Volume down (16) and Volume up (17) buttons
note:
Track control functions from the buttons on the Glows and remote will require your device to have Bluetooth
profile AVRCP. Please check your device’s manual if unsure.
Controlling the lights
The Glow Stereo has many different settings for the lighting effects. They can be used whilst the speaker is turned on
or off. Press (don’t hold) the Power button (A) to turn the lights on or off. You can also press the light ON/OFF button (3)
on the remote. Once the light is on, you can:
Press the:
1. red button (4)
2. green button (5)
3. Blue button (6)
4. Purple button (7)
5. Yellow button (8)
6. Cyan button (9)
7. Candle (orange) button (10)
8. White button (11)
9. Cycle colour button (12)
Change the brightness of the light
The brightness setting will only affect solid colours. Press and hold the:
1. Brightness up button (1) to increase the brightness
2. Brightness down button (2) to decrease the brightness
[continued...]
