12
13
[...continued]
Controlling the lights
Change the effects
Press the:
1. Flash button (20) and the lights will flash through all the different colours automatically
2. Strobe button (21) for the lights to strobe on and off. You can change the colour then press the Strobe button (21)
to strobe different colours
3. Fade button (22) for the lights to fade in and out red, blue and green (the colours cannot be changed)
4. Smooth button (23) for the lights to smoothly change between red, blue and green (the colours cannot be changed)
5. Music Lights button (24) for the lights to change to the beat of the music. This will only work if the volume is set to
maximum on both your device and the Glow. When the Glow is not detecting the music it will automatically switch
to Smooth mode. When the music is detected, it will automatically start flashing the lights in time to the music
(providing the Music Lights button (24) was the last button to be pressed)
IP54 rating
The Glow Stereo is rated IP54. This means that the Glow Stereo can be exposed to splashing water for up to 5 minutes
and no harm will come to it. It also means that the Glow Stereo is dust protected. Do not expose the Glow Stereo to
jets of water or submerge it entirely as it is not capable of preventing damage to itself in these circumstances.
Please also make sure that the protective rubber flap is properly shut, otherwise the IP54 rating becomes invalid.
Care for your Glow stereo
Please DOn’T:
• Drop the Glow Stereo as this will invalidate your warranty
• Open up the Glow Stereo as there are no user serviceable parts inside
• Expose the Glow Stereo to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO:
• Clean the Glow Stereo with a soft dry cloth and no detergents
Specifications
Bluetooth
V2.1
Bluetooth range
up to 10 m
output rMS
3 W x 2
Battery
4400 mAh Li-ion
Charge time
up to 7 hours
Play time
up to 18 hours
Water-resistant rating
iP54
Unit size
H150 x W150 x D150 (mm)
