12
13
Please nOTe:
Your device will have an internal amplifier and if it is playing digital files like MP3s it will also have
an integrated DAC (Digital Audio Converter). If you turn up the volume to 100%, your device will be sending distorted
signals to the Hive Discovery. To avoid this and to get the best sound quality from the speaker, we recommend that
you do not run your device any higher than 95% volume.
leD torch
To use the leD torch:
1. Press (don’t hold) the Torch button (8) to turn the torch on
2. Press (don’t hold) the Torch button (8) to turn the torch off whilst it is on
The torch also features an SOS mode. When enabled, the torch will flash ‘SOS’ in Morse code.
To activate this feature:
1. Double press the Torch button (8)
2. Single press the Torch button (8) to deactivate SOS mode
UsB output
Using the USB output (1) on the Hive Discovery, you can charge most smartphones, MP3 players and other mobile
devices (excluding tablets). To use the USB output:
1. Pull the protective cover out of the USB output (1) socket
2. Plug the USB cable into the USB output (1) and the other end into your device
3. Your device will automatically begin charging
4. Remove the charging cable and fit the protective cover back in place when finished
note:
Charging a device using the USB output (1) will dramatically reduce the remaining play time of the speaker.
If the battery runs flat whilst charging a device, you will not be able to use the speaker until it has been recharged.
