6
7
Bluetooth setup
Pairing a Bluetooth device for the first time
Pairing with nFC
If your device has NFC, you can simplify the pairing process. To pair to the Hive Evolution via NFC:
1. With the Hive Evolution turned off, press and hold the MFB (1) for 3 seconds
2. Wait for 10 seconds and the LED indicator (2) will flash blue quickly
3. Activate the Bluetooth and NFC features on your device (check your device’s manual if you’re
unsure how to do this)
4. Place your phone next to the NFC contact point (6) and a prompt should appear saying
‘Pair with Bluetooth device Hive Evolution?’ (or similar)
5. Press ‘Yes’ and your device will then pair and connect to the Hive Evolution
note:
If your device has NFC enabled and it is not picking up the Hive Evolution, try moving the device
around until the NFC is picked up. If using a case on your device, this may obstruct the NFC from working.
[continued...]
leD status
leD indicator is:
Hive evolution is:
Flashing blue once a second
Searching for paired devices
Rapidly flashing blue
In pairing mode
Flashing blue every 2 seconds
Paired and ready to play in Bluetooth mode
Solid blue
Paired and playing in Bluetooth mode
Blue and red
In aux mode
Flashing red every 5 seconds
Low battery – please recharge
Flashing red every 2 seconds
Charging (LED indicator will go off once charging is complete)
