Kitsound hive evolution, User Manual

8

9

[...continued]

 Bluetooth setup

Pairing without nFC

1.  With the Hive Evolution turned off, press and hold the MFB (1) for 3 seconds
2.  Wait for 10 seconds and the LED indicator (2) will flash blue quickly
3.   Activate the Bluetooth feature on your device and search for Bluetooth devices (check your device’s manual if 

you’re unsure how to do this)

4.  Select ‘HIVE EVOLUTION’ from the list of found devices
5.  If asked for a passcode, enter ‘0000’ and the Hive Evolution will then be connected to your device
6.  After pairing successfully, the blue light will flash slowly until you play your connected device
7.   The next time the Hive Evolution is turned on, it will automatically search for and attempt to connect to the last 

paired device

note:

 If your device is not connecting automatically, it’s because it is not the last paired device. Simply delete  

‘Hive Evolution’ from the list of Bluetooth devices on your device and re-pair.

re-pairing or pairing new devices

1.   Make sure the Bluetooth is turned off on any previously paired devices or – with the Hive Evolution turned off,  

press and hold the MFB (1) for 8 seconds

2.  Follow ‘Pairing a Bluetooth device’ instructions from step 1

Playing audio wirelessly

1.  Follow the instructions in the ‘Pairing a Bluetooth device’ section
2.  Use the controls on your device to select content
3.  Audio played through the connected Bluetooth device will now be heard through the speaker
4.  To play or pause the selected track, use the controls on your device or press the MFB (1)
5.   To skip to the next track, use the controls on your device or press the MFB (1) twice. Previous track can only be 

controlled using your device

6. The volume can be adjusted using only your device 

note:

 Track control functions from the MFB (1) on the Hive Evolution will require your device to have Bluetooth profile 

AVRCP. Please check your device’s manual if unsure.

Using the aux audio input

1.  With the Hive Evolution turned on, insert the 3.5 mm audio cable into the Aux input (3) on the Hive Evolution
2.  The LED indicator (2) will turn red and blue and any active Bluetooth connection will disconnect
3.  Plug the other end of the aux cable into the audio/headphone output on a MP3 player or other audio source
4.  Audio played through the connected device will now be heard through the speaker
5.  The volume can be adjusted on your device only

note:

 The MFB (1) does not operate in aux input mode.