background image

22

23

FCC ID: 2ADFF-KSSMXLBK

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and  
(2)  this device must accept any interference received, including interference that may cause  

undesired operation.

Warning:

 Changes or modifications not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in  
a particular installation. If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

IC: 23562 – KSSMXLBK

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following 
two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, 
including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts 
de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire  
de brouillage ; 2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est 
susceptible d’en compromettre le fonctionnement.

The use and operation of this speaker is beyond our control. Warranty of the KS SLAM XL is limited to defects caused by faulty manufacture  

or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances.
This does not affect your statutory rights.

Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, 

non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties.

We are sorry for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product 

improvement and development.

Summary of Contents for KS SLAM XL













Reviews: