12
13
LED lights indications
Standby mode
No LED
Pairing mode
Flash white quickly for new device pairing
Flash white slowly for auto reconnection to last paired device
Paired in Bluetooth mode
Solid white
Party mode 1
The KS LED Indicator (9) will turn red for a short time before
changing to the same flashing as the RGB driver lights
Party mode 2
The KS LED Indicator (9) will turn blue for a short time before
changing to the same flashing as the RGB driver lights
Party mode 3
The KS LED Indicator (9) will turn green for a short time before
changing to the same flashing as the RGB driver lights
Aux-in mode
Solid red
TWS pairing
KS LED Indicator (9) Flash white quickly
Enter TWS mode
LED Indicator (10) Solid pink
TWS paired with device
LED Indicator (10) Solid pink
Maximum volume reached
KS LED Indicator (9) will flash twice
Pairing the speaker to your device
•
Turn the Slam XL on by holding the On/Off (1) button for 3 seconds
•
The Slam XL will automatically enter pairing mode if a previously paired device is not detected
•
The KS LED Indicator (9) will flash white whilst in pairing mode
•
Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices
•
Select ‘KS Slam XL’. If asked for a passcode, enter ‘0000’
•
Once paired, the speaker will play an audio tone and the KS LED Indicator (9) will shine a solid white
Re-pairing or pairing new devices
1. Turn Bluetooth off on any previously paired devices
2. Follow the ‘Pairing the speaker to your device’ instructions
OR
1. Start re-pairing by holding the BT Multi-Pair (8) Button for 3 seconds
2. Follow the ‘Pairing the speaker to your device’ instructions
