7
Functions
Rear panel interface
Note: Please connect the audio cables before switching on the unit
• HDMI 1/HDMI 2:
HDMI input
• HDMI OUT:
HDMI output
• AUX 1/AUX 2:
3.5 mm audio input
• OPTICAL:
Optical digital audio input
• DC IN:
Please use the supplied power adapter (18 V/4 A)
• ON/OFF:
Power switch
Note: Use the remote control to switch between input modes. When powered off/on, the unit will remember the last input mode.
Sound mode setting
In order for the sound on the Ovation to be as powerful as possible, there are three modes to choose from on the remote according to the input source
• Music: use this for listening to music
• Movie: virtual surround sound effect makes for an immersive film viewing experience and can also be used for music to give a wider soundstage
• Night: removes all low frequencies to allow listening without disturbing neighbours or sleeping partners/children etc
LED indicator status
1. Power
Flashing quickly: volume and treble/bass is being adjusted. Flashing will stop when
at maximum or minimum
On:
the unit is plugged in and the power switch is in the ‘ON’ position
Off:
the Ovation is in standby mode. To turn off completely, use the ‘ON/OFF’ power switch on the rear panel
2. Input source
On:
indicates which source the unit is currently set to
Double flash:
the input mode is on and active
Aux inputs
The Aux 1 and Aux 2 inputs can be used for any device with a 3.5 mm (headphone) output such as a mobile phone, MP3 player and some TVs. You can
use either the provided cables or one of your own. The volume will normally be controlled on both the device you are playing from and on the Ovation.
HDMI IN 1
HDMI IN 2
HDMI OUT
AUX1
AUX2
OPTICAL
DC IN
ON/OFF
1
2
2
2
2
2
2
