※
CURRENT CONTROL : After gas valve on, it control the current as 0 mA for 0.5 seconds and then move as the table.
※
Burner fan control based on the targeted 80
℃
water temp. during Central heating function
-. In Central heating water temp. below 60, it works by Max RPM+@; in case of 60 ~ 70, it run with proportional RPM
controlled by 1; over 70, it operate with max RPM.
5). Air pressure specification
basic rpm+540 rpm
basic rpm+660 rpm
basic rpm+660 rpm
basic rpm+540 rpm
basic rpm+660 rpm
basic rpm+660 rpm
basic rpm+540 rpm
basic rpm+660 rpm
basic rpm+660 rpm
basic rpm+540 rpm
basic rpm+660 rpm
basic rpm+660 rpm
basic rpm+540 rpm
basic rpm+660 rpm
basic rpm+660 rpm
basic rpm+540 rpm
basic rpm+660 rpm
basic rpm+660 rpm
basic rpm+540 rpm
basic rpm+660 rpm
basic rpm+660 rpm
basic rpm+540 rpm
basic rpm+660 rpm
basic rpm+660 rpm
※
Proportional controlled fan RPM : basic RPM + 720 RPM
※
In order to control the gas valve proportionally, it works by max. and min. repeatedly before of starting the
ignition transformer.
※
Max. RPM : 7200 rpm , Min. RPM : 960 rpm
6). MODEL
별
적용부품
및
일반기능
Type
Close
type
◎
◎
◎
RPM/mm2O
20000K
capacity
16000K
Model
FF
16K
output value
20K
output value
RPM/mm2O
25K
output value
RPM/mm2O
RPM/mm2O
LPG
FF
16K
output value
30K
output value
RPM/mm2O
30K
output value
output value
RPM/mm2O
20K
LNG
- If the fan works below minimum RPM, it indicates "06 Error".
- If the fan works over maximum RPM, it displays "07 Error".
25K
※
Fan Error
◎
◎
◎
◎
25000K
30000K
◎
◎
◎
◎
◎
output value
RPM/mm2O
DC FAN
condensed water sensing
cool /hot water, water flow sensor
RPM/mm2O
MIN
MAX
MAX
Heating
Bath
38페이지