Kiturami KRP-20A, User Manual

How to operate

How to operate

How to use Reservation function

Press the [                  ] button until ‘Reservation’ is

displayed on the display.    

(The operation lamp lights at the predetermined 

time, and reserved operation starts.)

▶

Example: Operate the boiler for 20 minutes, shut 

    down operation of the boiler, and then operate 

    the boiler again for 20 minutes.

▶

How to change time for reserved start

Press the Reserve Set button.

When the reserved shutdown (min.) time 

flashes, press the Up (▲)/Down (▼) button 

to set the desired time (min).

▶

 When you complete setting in this condition, the 

     reserved shutdown time operates first.

Hint for boiler operation

Hint for boiler operation

Press the Reservation Setting button.

When the reserved shutdown (min.) time 

flashes, press the Up (▲)/Down (▼) button 

to set the desired time (min.).

▶

 When you complete setting in this condition, the 

    reserved shutdown time operates first.

Utilizing Reservation function

The Reservation function enables savings on fuel costs by operating the boiler for a specified number 

of hours by setting the operation time and the shutdown time of the boiler.

(The operation time and the shutdown time will appropriately be adjusted dependent upon the season 

and the insulation conditions of the houses.)

Press the [

] button to display ‘

Outing

’.

(The Outing function is capable of maintaining the 

room temperature at the minimal level, and of 

preventing a rupture of the boiler.)

Function of preventing frozen rupture

The function for preventing a rupture of the boiler during freezing weather conditions maintains the 

proper temperature of the boiler body, the floor heater pipes, and the pipes connected to the heating 

pipe, thus preventing them from rupturing in freezing conditions. When you leave your home in the 

winter season, you should leave the power cable of the boiler plugged in.

※

 When you set the room temperature to 10 to 15

℃

 during an absence from home, you can prevent 

     the boiler from rupturing due to extremely low temperatures.

▶

The function of preventing a rupture in freezing weather does not operate in any of 

the cases described below

-In the event of a power failure, or when the power cable of the boiler is not plugged in.

-In the event of poor insulation of the water feed pipes or exposed pipes.

How to use Outing function

If there is no specified time for arbitrary 

operation, the boiler operates its function

independently of the settings.

▶

 When you complete setting in this condition, the 

    reserved shutdown time operates first.

Press

Reservation

Setting button 

and then set the 

reservation time