Kity 3403301901, Translation From The Original Instruction Manual

english 9

Manufacturer:

scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen

Dear customer,

we wish you a pleasant and successful working experience 
with your new Kity machine.
According to the applicable product liability law the manu-
facturer of this device is not liable for damages which arise 
on or in connection with this device in case of:
•  improper handling,
•  non-compliance with the instructions for use,
•  repairs by third party, non authorized skilled workers,
•  installation and replacement of non-original spare parts,
•  improper use,
• failures of the electrical system due to the non-com-

pliance with the electrical specifications and the 
VDE 0100, DIN 57113 / VDE 0113 regulations

Recommendations:

Read the entire text of the operating instructions prior to 
the assembly and operation of the device.
These operating instructions are intended to make it easier 
for you to get familiar with your device and utilize its in-
tended possibilities of use.
The operating instructions contain important notes on how 
to work safely, properly and economically with your ma-
chine and how to avoid dangers, save repair costs, reduce 
downtime, and increase the reliability and working life of 
the machine.
In addition to the safety regulations contained herein, you 
must in any case comply with the applicable regulations of 
your country with respect to the operation of the machine.
Put the operating instructions in a clear plastic folder to 
protect them from dirt and humidity, and store them near 
the machine. The instructions must be read and carefully 
observed by each operator prior to starting the work. Only 
persons who have been trained in the use of the machine 
and have been informed on the related dangers and risks 
are allowed to use the machine. The required minimum 
age must be met.
In addition to the safety notes contained in the present 
operating instructions and the special regulations of your 
country, the generally recognized technical rules for the 
operation of wood working machines must be observed.

General Notes

•  When you unpack the device, check all parts for possible 

transport damages. In case of complaints the supplier is 
to be informed immediately. Complaints received at a 
later date will not be acknow ledged.

•  Check the delivery for completeness.
•  Read the operating instructions to make yourself famil-

iar with the device prior to using it.

•  Only use original Kity parts for accessories as well as for 

wearing and spare parts. Spare parts are available from 
your specialized dealer.

•  Specify our part numbers as well as the type and year of 

construction of the device in your orders.

PAB800

Delivery Status

Belt/Disc Sanding machine

Sanding Disc

Disc Guard

Accessory Bag

Operation Manual

Technical Data
Dimensions  

L x W x H mm

475/365/325

ø Disc mm

150

RPM Disc

2850

Belt dimensions 

mm

100 x 914

Belt Speed m/s

7,5

Belt Tilt

0°-90°

Table Size mm

215 x 146

Table Tilt

0°-45°

Gewicht kg

21.9

Drive
Motor V~/Hz

230–240/50

Input P1 W

370

Subject to technical changes!

Noise

Total vibration values determined in accordance with 

EN 61029.

sound pressure level L

pA

85 dB(A)

uncertainty K

pA

3 dB

sound power level L

WA

96 dB(A)

uncertainty K

WA

3 dB

Wear hearing protection.

The effects of noise can cause a loss of hearing. Total 

vibration values (vector sum - three directions) deter-

mined in accordance with EN 61029.

FEATURES

SANDING DISC:

 A round sanding disc located on the side of 

the belt/disc sander.

TRACKING KNOB: 

A tracking knob aids in centering the 

sanding belt.

WORK SUPPORT: 

Supports the workpiece on the sanding 

belt.

WORKTABLE: 

Equipped with a sturdy, worktable that pro-

vides a stable surface when using either the disc sanding 
or the belt sanding feature.

BEVEL GAUGE: 

The worktable comes equipped with a bevel 

gauge that indicates the degrees the worktable can be 
tilted up to 45°.

BELT TENSION LEVER: 

The belt tension lever releases the 

belt tension for easy belt replacement.

HORIZONTAL AND VERTICAL POSITION HOLES: 

The horizon-

tal and vertical position holes are used for changing the 
position of the belt from horizontal to vertical.

SANDING BELT: 

The sanding belt can be adjusted from hori-

zontal to vertical providing different positions for sanding 
workpieces of different shapes and sizes.

m

In these operating instructions we have marked the 
places that have to do with your safety with this 
sign.