Kity 3403301901, Translation From The Original Instruction Manual

10 english

m 

General Safety Rules

m 

Caution!

Read all safety regulations and instructions. Any 

errors made in following the safety regulations and 

instructions may result in an electric shock, fire and/

or serious injury. Keep all safety regulations and 

instructions in a safe place for future use.

m 

Warning! 

To protect against electric shock, injury 

and fire the following basic safety precautions must 

be observed when using power tools.

Read and follow these instructions before using the 

equipment and keep the safety information in a safe 

place.

Safe work

1 

Keep the work area orderly

–

Disorder in the work area can lead to accidents.

2 

Take environmental influences into account

–

Do not expose electric tools to rain.

–

Do not use electric tools in a damp or wet environ-

ment.

–

Make sure that the work area is well-illuminated.

–

Do not use electric tools where there is a risk of 

fire or explosion.

3 

Protect yourself from electric shock

–

Avoid physical contact with earthed parts (e.g. 

pipes, radiators, electric ranges, cooling units).

4 

Keep children away

–

Do not allow other persons to touch the equipment 

or cable, keep them away from your work area.

5 

Securely store unused electric tools

–

Unused electric tools should be stored in a dry, 

elevated or closed location out of the reach of 

children.

6 

Do not overload your electric tool

–

They work better and more safely in the specified 

output range.

7 

Use the correct electric tool

–

Do not use low-output electric tools for heavy 

work.

–

Do not use the electric tool for purposes for 

which it is not intended. For example, do not use 

handheld circular saws for the cutting of branches 

or logs.

–

Do not use the electric tool to cut firewood.

8 

Wear suitable clothing

–

Do not wear wide clothing or jewellery, which can 

become entangled in moving parts.

–

When working outdoors, anti-slip footwear is 

recommended.

–

Tie long hair back in a hair net.

9 

Use protective equipment

–

Wear protective goggles.

–

Wear a mask when carrying out dust-creating work.

10 

Connect the dust extraction device

–

If connections for dust extraction and a collecting 

device are present, make sure that they are con-

nected and used properly.

–

Operation in enclosed areas is only permitted 

with a suitable extraction system.

11 

Do not use the cable for purposes for which it is not 

intended

–

Do not use the cable to pull the plug out of the outlet. 

Protect the cable from heat, oil and sharp edges.

12 

Secure the workpiece

–

Use the clamping devices or a vice to hold the 

workpiece in place. In this manner, it is held more 

securely than with your hand.

–

An additional support is necessary for long work-

pieces (table, trestle, etc.) in order to prevent the 

machine from tipping over.

–

Always press the workpiece firmly against the 

working plate and stop in order to prevent bounc-

ing and twisting of the workpiece.

13 

Avoid abnormal posture

–

Make sure that you have secure footing and 

always maintain your balance.

–

Avoid awkward hand positions in which a sudden 

slip could cause one or both hands to come into 

contact with the saw blade.

14 

Take care of your tools

–

Keep cutting tools sharp and clean in order to be 

able to work better and more safely.

–

Follow the instructions for lubrication and for tool 

replacement.

–

Check the connection cable of the electric tool 

regularly and have it replaced by a recognised 

specialist when damaged.

–

Check extension cables regularly and replace 

them when damaged.

–

Keep the handle dry, clean and free of oil and 

grease.

15 

Pull the plug out of the outlet

–

Never remove loose splinters, chips or jammed 

wood pieces from the running saw blade.

–

During non-use of the electric tool or prior to 

maintenance and when replacing tools such as 

saw blades, bits, milling heads.

16 

Do not leave a tool key inserted

–

Before switching on, make sure that keys and 

adjusting tools are removed.

17 

Avoid inadvertent starting

–

Make sure that the switch is switched off when 

plugging the plug into an outlet.

18 

Use extension cables for outdoors

–

Only use approved and appropriately identified 

extension cables for use outdoors.

–

Only use cable reels in the unrolled state.

19 

Remain attentive

–

Pay attention to what you are doing. Remain 

sensible when working. Do not use the electric 

tool when you are distracted.

20 

Check the electric tool for potential damage

–

Protective devices and other parts must be care-

fully inspected to ensure that they are fault-free 

and function as intended prior to continued use of 

the electric tool.

–

Check whether the moving parts function fault-

lessly and do not jam or whether parts are dam-

aged. All parts must be correctly mounted and all 

conditions must be fulfilled to ensure fault-free 

operation of the electric tool.

–

Damaged protective devices and parts must be 

properly repaired or replaced by a recognised 

workshop, insofar as nothing different is specified 

in the operating manual.

–

Damaged switches must be replaced at a cus-

tomer service workshop.

–

Do not use any faulty or damaged connection 

cables.

–

Do not use any electric tool on which the switch 

cannot be switched on and off.