10
Control Description
Group A/B
Page 1
- The Group Button is used
in the Kiwi-106 to change the Current
Group. Press and hold the GROUP
Button and select the Group using
the BANK Buttons 1-8. BANK1 will
select Group1 through to BANK 8
which will select Group 8.
Page 2-5
- The Group Button is not
used and is ignored
Bank 1-8
Page 1
- The Bank Buttons are used
to select the Bank portion of the
Patch. Each Patch is made up of a
Group (1-8), Bank (1-8) and a Patch
(1-8) making 64 Patches on any
Group. There are 8 Groups making a
total of 512 Patches (8 x 64).
Page 2
- The Banks Buttons are
used during Seq Edit as follows
Bank 1 – Insert Rest
Bank 2 – Insert Tie
Bank 3 – Step Backwards
Bank 4 – Step Forwards
Bank 5 – Set Seq Length
Bank 6 - Overdub
Bank 7 – Insert Step
Bank 8 – Delete Step
Page 3
- The Bank Buttons are used
to toggle Pattern Steps 1-8 during
Pattern Edit.
Page 4
- The Bank Buttons are used
to select the Sysex Dump type to
send. Dumps are not sent until the
'WRITE' button is pushed.
Page 5
- The Bank Buttons are used
to select the Global Parameter to edit.
Patch 1-8
Page 1
- The Patch Buttons are used
to select the Patch portion of the
Patch. Each Patch is made up of a
Group (1-8), Bank (1-8) and a Patch
(1-8) making 64 Patches on any
Group. There are 8 Groups making a
total of 512 Patches.
Page 2
- The Patch Buttons are used
to Select a Sequence # (1-8).
Page 3
- The Patch Buttons are used
to Select a Pattern # (1-8). The Patch
Buttons are used to toggle Pattern
Steps 9-16 during Pattern Edit.
Page 4
- The patch Buttons are not
used.
Page 5
- The Bank Buttons are used
to select the Global Parameter to edit.
Range 16'-4'
The Range buttons will select the
Octave of the current Patch and will
work in Pages 1, 2 & 3
Wave Pulse/Saw
The Waveform Buttons will select the
Waveform of the current patch and
will work in in Pages 1, 2 & 3
www.kiwitechnics.com
Kiwi-106 Upgrade User Manual v204
