24
Button use in detail
Bank 1 – Rest
When the Bank 1 button is pressed
while in edit mode a blank step will
be inserted at the current
sequence step.
Note - this button
can only be used if no notes are
being pressed.
Bank 2 – Tie
When the Bank 2 button is pressed
while in edit mode and while notes
are being pressed a tie step will be
inserted at the current sequence
step. A tied step will start the note
in the sustain stage of the
envelope when it is played.
Note –
A tie can only follow a sequence
step that contains note data.
Therefore it cannot be placed after
a rest or at the first step in a
sequence.
Bank 3 – Step Back
When the Bank 3 button is pressed
while in edit mode the sequence
will step back one position if
possible and sound the step.
Bank 4 – Step Forward
When the Bank 4 button is pressed
while in edit mode the sequence
will step forward one position if
possible and sound the step. It is
possible to step one position past
the last step so new steps can be
added at the sequence end point
unless the sequence is full (124
steps).
Bank 5 – Set Length
When the Bank 5 button is pressed
while in edit mode the sequence
length will be set to the step
showing on the display. The step
showing will be the last step to
play and all steps after this will be
erased.
Bank 6 – Overdub
When the Bank 6 button is pressed
while in edit mode and notes are
being played the sequence step
notes already in the sequence
step will be combined with any
being played to a maximum of six
notes.
Bank 7 – Insert Step
When the Bank 7 button is pressed
while in edit mode and notes are
being held the sequence step is
inserted at the current step that is
showing on the display.
Note – if
the sequence is full (124 steps)
the last step will be lost when the
Bank 7 button is pressed.
Bank 8 – Delete Step
When the Bank 8 button is pressed
while in edit mode the sequence
step that is showing on the display
is deleted and all steps after this
point are moved up one position.
www.kiwitechnics.com
Kiwi-106 Upgrade User Manual v204
