29
Setting up with External Devices
Midi Notes
Midi though should be used if
multiple units are being used on the
midi chain to reduce delays. While
every effort has been made to make
the midi as fast as is possible within
the KiwiTechnics Kiwi-106 upgrade
there will always be small delays
between the midi input and midi
output as the commands need to be
interpreted which cannot be done
until a full command arrives. Full
midi command details are at the end
of the manual.
External Clock
An External Clock can be fed into the
'PATCH' input on the rear of the
Juno-106. This can then be selected
to drive the Master Clock. This clock
will count each time the Patch Input
changes from 0v to 5-15v ( Positive
pulse).
Hold Pedal
Any pedal that shorts the tip to
ground when not pressed can be
used. It will need to go open circuit
when pressed to suit the Juno-106
hardware.
www.kiwitechnics.com
Kiwi-106 Upgrade User Manual v204
