17
Button use in detail
Bank 1 – Rest
When the Bank 1 button is pressed
while in edit mode a blank step will
be inserted at the current
sequence step.
Note - this button
can only be used if no notes are
being pressed.
Bank 2 – Tie
Due to the fact that the PolySix has
hardware envelopes it has proved
to be too difficult to implement a
Tie system in the KiwiSix. This
button is ignored
Bank 3 – Step Back
When the Bank 3 button is pressed
while in edit mode the sequence
will step back one position if
possible and sound the step.
Note – the next step to write will be
after the step that sounds as a
step write is always made to the
next memory location. It is done
this way so that the Seq will grow
as you play notes. i.e. is you want
to change step three in your
sequence step back until step 2
sounds (and shows on the step
display) then play the note(s) you
want in step three.
Bank 4 – Step Forward
When the Bank 4 button is pressed
while in edit mode the sequence
will step forward one position if
possible and sound the step. If the
Seq is positioned on the last step
the next note entered will be
placed after the last step making
the seq one step longer.
Bank 5 – Set Length
When the Bank 5 button is pressed
while in edit mode the sequence
length will be set to the step
showing on the display. The step
showing will be the last step to
play and all steps after this will be
erased.
Bank 6 – Not Used
Bank 7 – Insert Step
When the Bank 7 button is pressed
while in edit mode and notes are
being held the sequence step is
inserted at the current step that is
showing on the display.
Note – if
the sequence is full (124 steps)
the last step will be lost when the
Bank 7 button is pressed.
Bank 8 – Delete Step
When the Bank 8 button is pressed
while in edit mode the sequence
step that is showing on the display
is deleted and all steps after this
point are moved up one position.
www.kiwitechnics.com
KiwiSix Upgrade User Manual v3
