13
Removing/Replacing the Spacer
•
To attached the spacer
①
, place it on the cutting head
and press it firmly. Ensure that the two small tabs on the
spacer
①
grip into the two recesses on the appliance:
•
To remove it, pull the spacer
①
off with a slight clockwise
twist.
•
To protect the shaver foil
②
, you should remove the
spacer
①
when not using the appliance and place the
protective cap
⑥
on the shaver foil
②
.
Cleaning and Care
Empting the Fluff Collector
•
First pull the fluff collector
③
a little way down and lift
it off.
•
Empty out the textile fluff.
•
Replace the fluff collector
③
so that it is firmly in place.
•
Cleaning the housing and cutting head