3
KSI-6450 User Manual
EN
BEFORE THE FIRST USE
USE
CLEANING AND MAINTENANCE
Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic
from the device.
• When operating the appliance for the first time, allow it to steam for a few minutes. This will
remove any impurities and odours that might have been left by the manufacturing proces.
You may want to try the steamer on an old piece of fabric before steaming your garment the
first time.
• Press the water tank release button and pull out the water tank. Open the water inlet cover
and fill the tank with water until it reaches the MAXIMUM level. Do not exceed the MAX. LEVEL.
Always ensure the water tank is at least third full.
• Put back the water tank.
• Hold the appliance with your hand positioned safely at the neck of the garment steamer in
an upright position. Use your other hand to attach the fabric brush onto the steam head. The
fabric brush can be attached either way and will lock into position with an audible “click”.
• Connect the plug to wall outlet and press the power button.
• After the completion of adding water, plug inpower, and turn on the power button, the
Indicator light is red ( it is heating ).
wait for about 45s, the red indicator light goes out , the preheating is finished, the machine is
ready for use, press the steam switch to use it.
Note:During the process of using ,if the steam indicator changes to red color again, do not care
about it , This is caused by the normal operation of temperature control .
• Press and hold down the steam button. Steam facing away from you in an upright position.
Gently press the fabric brush against the garment and move the appliance up and down.
• Release the steam button to stop the steam.
• After using the appliance, press the power button to turn it off. Disconnect the power plug
out of the socket.
• Take off the water tank off and empty the remaining water from the tank.
• Let the appliance cool down in a upright position.
CAUTION: the high temperature can reach 180 ºC, please confirm whether the material is high-
temperature resist or not before steaming. Do not leave the spraying panel on the same spot
for a long time to avoid damage to the garment.
CAUTION: when not using the appliance and before storage, continue steaming until the water
tank runs out of water, then turn off and unplug the appliance and wait until the appliance is
cooled down completely.
• Do not put the appliance in water. use a dry clean cloth to dry the appliance, no special
cleaning agent is needed.
• Make sure the main body is dry before storage or packing.
GUIDELINES FOR PROTECTION OF THE ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but must be
taken to a central point for the recycling of electric and electronic domestic appliances. This symbol
on the appliance, instruction manual and packaging puts your attention to this important issue. The
materials used in this appliance can be recycled. By recycling used domestic appliances you contribute
to foment the protection of our environment. Ask your local authorities for information regarding the
point of recollection.
