Gateway TLG3901B/BLV2 Series User Manual
V2.0.4
10
December 2020
3.2.
Channel Setup
Channel setup, as shown in Figure 3-2. To setup LoRa concentrator frequencies for receiv-
ing packets, there are some parameters must be set, such as using LoRaWAN or not, de-
fine
Sync Word
for identifying the packet prefix, choosing each radio’s central frequencies,
setup frequency bias in each channel, to define standard LoRa channel bandwidth and
other options. Table 3-1 describes each parameter’s options.
Figure 3-2 Channel Setup
