19
INSTALLATION
1. MOUNTING THE SENSORS
Mount the sensors into the front bumper, horizontally near to the license
plate with the double sided tape.
2. FIXING THE CABLES
Connect the sensors into the External Sensor Plug of the Control Panel.
Keep all cables away from hot surface, sharp edges and moving parts
inside the vehicle.
3. POWERING ON THE DEVICE
To turn on the Remote Laser Detector, put the control panel into the
cigarette lighter socket of the vehicle. Then the power lamp [P] is on, and
the control panel starts working.
4. CHECKING THE CONNECTION
The [L] – Link LED shows connection status between control panel and
sensors. If it is correctly connected, the [L] LED is on.
5. CHECKING THE DEVICE
To check the device, shoot the sensors with a Laser Tester (not included).
If it works, the [M] LED lights up. The [M] LED signals all the activities of
the device.
6. CONNECTING THE GPS DETECTOR
Connect the GPS Detector and the Remote Laser Detector with the Sub
Power Cable.
