background image

 

1

Overview 

      This Operating Manual covers information on safety 
and cautions. Please read the relevant information 
carefully and observe all the Warnings and Notes strictly. 

Warning 

To avoid electric shock or personal injury, read the 

Safety Information” and rules for safe operation 

carefully before using the Meter. 

Digital Multimeter Model KJ39E(hereafter referred to as “the 
Meter”) is 3 1/2 digits with steady operations, pocket size, 
fashionable structure and highly reliable hand-held 
measuring instrument. The Meter uses large scale of 
integrated circuit with double integrated A/D converter as its 
core and has full range overload protection. 
The Meter can measure AC/DC Voltage, DC Current, 
Resistance, Diodes, Continuity and so on. It is ideal tool for 
users. 

 

Unpacking Inspection 

       
Open the package case and take out the Meter. Check the 
following items carefully to see any missing or damaged part: 

z

 Operating Manual     1 piece 

z

 Test Lead            1 pair 

z

 9V Battery (6F22 or equivalent)      1 piece 

In the event you find any missing or damage, please 
contact your dealer immediately. 

Summary of Contents for KJ39E





















Reviews: