Figure 1 Figure 2
WiFi
WiFi connection
Password
Set the camera password
Alarm
You can choose to arm or cancel
arming.
Share
You can share and add via QR code.
Album
Photos or video files on the mobile
phone
Refer to the mailbox service provider's
guidelines for setting the alarm
mailbox
TF
Audio and video folder in TF card
Delete
Delete the current device in the
device list
Alias
Change the camera name
This button in the upper right corner,
you can view the version information
(Android can set whether to open the
message push)
Figure 1 Menu description
Step 1: AP connection (point-to-point)
A. Open the WLAN option in the phone settings, connect the name SZ *** hotspot, some brands of Android phones
(such as Huawei) will prompt "The current WLAN is not available for Internet access. Do you want to continue to
use this WLAN?", You must select "Use", otherwise Unable to connect to the APP. If you accidentally choose "not to
use", you need to select this hotspot in the WiFi list and set to "do not save" to reconnect.
B. Open the mobile phone software, each time you open the APP, it will automatically scan for new devices. If it is
not automatically added, please click to add a camera in the LAN
Step 2: P2P setting After the point-to-point connection is successful, you can start to set the P2P
mode. The steps are as follows:
Click the yellow arrow on the right of the APP to pop up the "Figure 1" menu, click on the leftmost WiFi icon in
the menu, select the hotspot and enter the password (Figure 2), the device will turn into a blue light, if the entered
password is correct, P2P remote access
* If you enter the wrong password, you need to rebind (long press the reset button for 4 seconds in the power-on
state and then reconnect)
* You must set a password (Figure 3) to see the video screen when you turn on the device for the first time (you
cannot access and add this device without setting the password after setting the password)
* After opening the camera screen, you can see the screen in Figure 4, the specific keys are defined in the following
table
