6.2.12.
Installation
Installation
Installation
Installation
6.2.13.
Hydraulic
Hydraulic
Hydraulic
Hydraulic installation
installation
installation
installation
The system designer is responsible for choosing the material and the cross
hydraulic connections between the chiller and the application. Other dependent factors include
the accepted pressure loss in the connection lines and the available pu
designing the connections attention must also be paid to the minimum flow rate to be maintained
and sufficient resistance to the maximum pump pressure.
In the case of chillers equipped with an internal tank the cold water cycle must be h
closed.
ATTENTION! Galvanised pipes must not be used if water
ATTENTION! Galvanised pipes must not be used if water
ATTENTION! Galvanised pipes must not be used if water
ATTENTION! Galvanised pipes must not be used if water
used! Formation of decomposition products, which result in silting up of the
used! Formation of decomposition products, which result in silting up of the
used! Formation of decomposition products, which result in silting up of the
used! Formation of decomposition products, which result in silting up of the
system!
system!
system!
system!
46 / 77
installation
installation
installation
installation
The system designer is responsible for choosing the material and the cross
hydraulic connections between the chiller and the application. Other dependent factors include
the accepted pressure loss in the connection lines and the available pump pressure. When
designing the connections attention must also be paid to the minimum flow rate to be maintained
and sufficient resistance to the maximum pump pressure.
In the case of chillers equipped with an internal tank the cold water cycle must be h
Filling and feed (topping up)
Draining
Unit outlet cold water circuit 1 (supply line
Unit outlet cold water circuit 1 (return line
Unit outlet cold water circuit 2 (supply line)
Unit outlet cold water circuit 2 (return line)
ATTENTION! Galvanised pipes must not be used if water
ATTENTION! Galvanised pipes must not be used if water
ATTENTION! Galvanised pipes must not be used if water
ATTENTION! Galvanised pipes must not be used if water
used! Formation of decomposition products, which result in silting up of the
used! Formation of decomposition products, which result in silting up of the
used! Formation of decomposition products, which result in silting up of the
used! Formation of decomposition products, which result in silting up of the
83000102.Kf
The system designer is responsible for choosing the material and the cross-section of the
hydraulic connections between the chiller and the application. Other dependent factors include
mp pressure. When
designing the connections attention must also be paid to the minimum flow rate to be maintained
In the case of chillers equipped with an internal tank the cold water cycle must be hydraulically
Filling and feed (topping up)
supply line)
return line)
(supply line)
(return line)
ATTENTION! Galvanised pipes must not be used if water
ATTENTION! Galvanised pipes must not be used if water
ATTENTION! Galvanised pipes must not be used if water
ATTENTION! Galvanised pipes must not be used if water----glycol mixtures are
glycol mixtures are
glycol mixtures are
glycol mixtures are
used! Formation of decomposition products, which result in silting up of the
used! Formation of decomposition products, which result in silting up of the
used! Formation of decomposition products, which result in silting up of the
used! Formation of decomposition products, which result in silting up of the
