Front panel
Square ONE Splitter
9
Front panel
The front panel of the Square ONE Splitter is divided into three main sections, as follows:
1
FIXED GAIN ISOLATED OUTPUT C / PARALLEL INPUT:
Eight-channel section containing the
paralleled inputs and transformer isolated balanced outputs; see “FIXED GAIN ISOLATED OUTPUT C /
PARALLEL INPUT section” on page 9.
2
ACTIVE SPLITTER:
Eight-channel section containing the channel controls; see “ACTIVE SPLITTER
section” on page 10.
3
Phones, power and media split:
see “Phones, power and media split section” on page 11.
4
Four cut-outs for rack mounting.
FIXED GAIN ISOLATED OUTPUT C / PARALLEL INPUT section
The functions of channels 1 to 8 in this section are
similar, although the input of channel 8 is also used
for the media split function.
1
TX OUT 1 to TX OUT 8 sockets:
Eight
transformer isolated balanced outputs, each with a
male XLR chassis connector.
2
IN 1 to IN 8 sockets:
Eight electronically
balanced inputs, each with a female XLR chassis
connector. Socket
IN 8
is one of the two channel 8
media split inputs, the other being on the rear panel.
3
Channel number and write-on panel.
2
3
1
4
3
1
2
