KLARO GmbH
8
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
2.2. Hazard statements
1. To ensure safety, all persons coming into direct contact with the plant must take note of the
contents of this documentation.
2. It is prohibited to use the system for a purpose other than that described by the manufacturer.
3. Locally applicable labour and safety regulations and laws must be followed even if they are not
explicitly listed in this guide. The same applies to environmental legislation.
4. If the operator detects faults or dangers, the manufacturer or the responsible maintenance
company must be informed immediately.
5. Safety devices must never be removed or bypassed during normal operation of the machine.
Safety devices may be temporarily bridged or disabled only by maintenance staff during repair
and maintenance.
6. When handling chemical substances, contact with chemicals should be avoided where possible.
Before beginning work with these substances, the instructions on the package must be read
and followed.
7. If the use of personal protective equipment (safety shoes, safety glasses, gloves, ear protection,
etc.) is required, it must be ensured that it will be used. Defective or damaged personal
protective equipment must be replaced immediately with properly functional protection.
8. Work on electrical installations may only be performed by qualified personnel.
9. All safety instructions and warnings on the machine must be kept in easily legible condition.
10. Hot parts must not come into contact with explosive or flammable chemicals.
11. Do not place objects filled with liquids on electrical cabinets; spillage of liquid can cause short
circuits.
12. The system must not be operated under the influence of alcohol (be careful about any residual
alcohol from the previous day!) or of medication affecting perception and responsiveness.
13. Before any maintenance and cleaning work, the plant must be de-energized.
14. The plant must always be left running, except for maintenance purposes, because proper
wastewater treatment cannot be ensured otherwise.
KLARO GmbH
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
9
2.3. Warnings
Always observe these instructions as personal injury or property damage may result otherwise!
Installation Site
Make sure that the machine cabinet is not installed above or in the immediate
vicinity of water vessels. Risk of electric shock in case of improper installation.
Electrical Supply
Circuit
Always connect the machine cabinet to a properly installed 230 V socket or
grounded socket that is protected with a 16A fuse in accordance with the
technical specifications.
In the event of a thunderstorm, electrical equipment connected to the mains
may be damaged. An overvoltage protection device in the building installation
is recommended as protection.
The connection lines must be laid in a manner that they do not present a
tripping hazard.
Explosive
Atmospheres
The controller must not be installed or switched on in environments with a
potentially explosive atmosphere or in places where combustible materials are
present. Sparks in such environments could cause explosion or fire, which can
lead to injury or death.
Interferences
The controller can cause a malfunction in medical equipment. The device
should therefore not be used near medical equipment.
Damages
The controller must not be operated if the housing or the insulation of a line is
damaged or dented.
Service Work
Servicing of the machine cabinet must be carried out by authorized personnel
or qualified electricians.
Power Supply
The power supply must be permanently ensured. Please make sure that the
control cabinet is secured by a proper fuse (16 A). Additional power consumers
on the same fuse may cause undesired operation.
KLARO GmbH
2
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
IMPORTANT:
•
This Operating Manual contains information about the plant, from installation
to maintenance, and must therefore be read before commissioning of the
plant!
•
All safety instructions must be observed!
•
The Operating Manual must be kept readily available during the operation of
the plant!
Plant Specifications
For any questions in the course of the operation of the plant, the specifications of your plant should
be noted as follows. With the help of this information, our staff will be able to help you more quickly
in the event of a malfunction. The specifications can be found on the nameplate, which is located
on the outside of the cabinet door for indoor cabinets, and inside the cabinet for outdoor cabinets.
Small Wastewater Treatment
Plant
PT
Sludge storage
Buffer
SB-Reactor
Approval No.:
Process class:
Certified:
Cabinet:
Controller:
Compressor:
Denomination:
Serial No.:
Article No.:
Additional module:
Article No.:
El. Connected load:
KLARO GmbH
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
3
CONTENTS
Page
1.
About this Operating Manual
6
1.1.
Original Language of Documentation
6
1.2.
Completeness
6
1.3.
Liability
7
2.
Safety
7
2.1.
Explanation of Warnings and Prohibitions
7
2.2.
Hazard statements
8
2.3.
Warnings
9
2.4.
Exclusion for Use
10
3.
Warranty
10
4.
Function of the SBR Plant
10
4.1.
Plants for carbon elimination (process classes C)
11
4.2.
Systems with Additional Nitrogen Removal (Process Classes N and D)
13
4.3.
Systems with Additional Phosphate Elimination (Process Class +P)
13
4.4.
Systems with Additional Sanitation (Process Class +S)
13
5.
Control of the Small Wastewater Treatment Plant
13
5.1.
Connections to the KL-controls (230V option for solenoid valves)
16
5.2.
Connections to the KL24 controller(24V option for stepper motor valves)
16
5.3.
Operating the Controller
18
5.3.1.
Querying Operating Hours
18
5.3.2.
Manual Control of the Valves and the Cabinet Fan in "Manual Mode"
19
5.3.3.
Setting Date/Time
20
5.3.4.
Set Holiday Mode
20
5.3.5.
Query Malfunctions - Query Old Malfunctions
21
5.3.6.
Display Settings
21
5.3.7.
Service Menu and Action Code
21
5.4.
Changing the Fuses
22
5.5.
Operation of Power Failure Detector
22
6.
Additional functions of the Controllers KLplus/ KL24plus and KLbasic/KL24base
23
6.1.
Underload detection (KLplus/KL24plus)
23
6.1.1.
Mode of Operation
24
6.1.2.
Commissioning
24
6.1.3.
Switching Off the Level Measurement
25
6.1.4.
Safety and Fault Messages
25
6.2.
Optional Functions
26
6.2.1.
Connection of an external alarm device
26
6.2.2.
Connection of a contactor for switching the compressor
26
6.2.3.
Connection of a UV reactor
26
6.2.4.
Phosphate precipitation with metering pump
26
7.
Maintenance, Repair and Operation
28
7.1.
Sludge Evacuation
28
7.2.
Operating Instructions
29
8.
Fault Messages and Troubleshooting
31
8.1.
Fault Message on the Display
32
8.2.
Unusual Water Levels - Troubleshooting
33
KLARO GmbH
2
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
IMPORTANT:
•
This Operating Manual contains information about the plant, from installation
to maintenance, and must therefore be read before commissioning of the
plant!
•
All safety instructions must be observed!
•
The Operating Manual must be kept readily available during the operation of
the plant!
Plant Specifications
For any questions in the course of the operation of the plant, the specifications of your plant should
be noted as follows. With the help of this information, our staff will be able to help you more quickly
in the event of a malfunction. The specifications can be found on the nameplate, which is located
on the outside of the cabinet door for indoor cabinets, and inside the cabinet for outdoor cabinets.
Small Wastewater Treatment
Plant
PT
Sludge storage
Buffer
SB-Reactor
Approval No.:
Process class:
Certified:
Cabinet:
Controller:
Compressor:
Denomination:
Serial No.:
Article No.:
Additional module:
Article No.:
El. Connected load:
KLARO GmbH
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
3
CONTENTS
Page
1.
About this Operating Manual
6
1.1.
Original Language of Documentation
6
1.2.
Completeness
6
1.3.
Liability
7
2.
Safety
7
2.1.
Explanation of Warnings and Prohibitions
7
2.2.
Hazard statements
8
2.3.
Warnings
9
2.4.
Exclusion for Use
10
3.
Warranty
10
4.
Function of the SBR Plant
10
4.1.
Plants for carbon elimination (process classes C)
11
4.2.
Systems with Additional Nitrogen Removal (Process Classes N and D)
13
4.3.
Systems with Additional Phosphate Elimination (Process Class +P)
13
4.4.
Systems with Additional Sanitation (Process Class +S)
13
5.
Control of the Small Wastewater Treatment Plant
13
5.1.
Connections to the KL-controls (230V option for solenoid valves)
16
5.2.
Connections to the KL24 controller(24V option for stepper motor valves)
16
5.3.
Operating the Controller
18
5.3.1.
Querying Operating Hours
18
5.3.2.
Manual Control of the Valves and the Cabinet Fan in "Manual Mode"
19
5.3.3.
Setting Date/Time
20
5.3.4.
Set Holiday Mode
20
5.3.5.
Query Malfunctions - Query Old Malfunctions
21
5.3.6.
Display Settings
21
5.3.7.
Service Menu and Action Code
21
5.4.
Changing the Fuses
22
5.5.
Operation of Power Failure Detector
22
6.
Additional functions of the Controllers KLplus/ KL24plus and KLbasic/KL24base
23
6.1.
Underload detection (KLplus/KL24plus)
23
6.1.1.
Mode of Operation
24
6.1.2.
Commissioning
24
6.1.3.
Switching Off the Level Measurement
25
6.1.4.
Safety and Fault Messages
25
6.2.
Optional Functions
26
6.2.1.
Connection of an external alarm device
26
6.2.2.
Connection of a contactor for switching the compressor
26
6.2.3.
Connection of a UV reactor
26
6.2.4.
Phosphate precipitation with metering pump
26
7.
Maintenance, Repair and Operation
28
7.1.
Sludge Evacuation
28
7.2.
Operating Instructions
29
8.
Fault Messages and Troubleshooting
31
8.1.
Fault Message on the Display
32
8.2.
Unusual Water Levels - Troubleshooting
33
9
