6
7
Method 2 Putting up your dance pole by screwing it into the ceiling
You may need: Stepladder/Stud Finder/Pencil/Tape Measure/Spanner/Screwdriver
STEP 1:
Measure the height form floor to ceiling.
STEP 2:
Ask a builder/handyman to attach the ceiling plate to the ceiling; there are two holes in the
ceiling plate for screws. If you have a plasterboard ceiling, the ceiling plate must be screwed into a joist.
We recommend using a stud finder to do it (they are available at DIY stores). Follow the instructions that
accompany the stud finder until you are sure you’ve found a ceiling joist, then mark it with a pencil. If
unsure, consult a qualified builder/handyman.
STEP 3:
•
Connect the base plate into the bottom rod by slotting them together, making sure that the screwth
-
read is at its lowest level.
•
Squeeze the fat end of the middle rod down into the skinny end of the bottom rod.
• Unscrew and extend the top rod so that the height indicator displays your ceiling height.
•
Slot the top rod into the secured ceiling plate ensuring the two pushpins click into place.
STEP 4:
Ask a builder/handyman to hold the dance pole in an upright position and continue the exact
above assembly steps except screwing the ceiling.
#
Manufacturer:
CHAL-TEC GmbH, Wallstraße 16, 10179 Berlin, Germany
