![background image](http://html1.mh-extra.com/html/klarstein/10028611/10028611_installation-and-user-manual_1976062013.webp)
13
Sterilising
• Unscrew the water reservoir lid.
• Fill the water reservoir using the opening as called for in the cooking guide on
the next page.
• Screw down the water reservoir lid so that the colored oval on the plug lines up
with the mark on top of the steamer/blender.
• Swivel the lid clockwise and lift to remove.
• Put the steaming basket without the magic board.
• Press
button. Select sterilizing function
. Then press
to start.
• The max sterilizing time is 30 mins; And the default setting is 6 mins; Also you
can press the “increase” and “decrease”button to choose the time you prefer.
• For one bottle 6 minutes is sufficient providing there is only 100ml of water
in the reservoir.
• When sterilization is completed, the appliance beeps and the light goes off.
Warming/Reheating/Defrosting
For warming, insert water as shown in table below into the reservoir. Ensure only
the correct amount of water is in the reservoir. Use the timing guide below to
warm a baby bottle to around 38 degrees.
Warming/Reheating time
How much water
in reservoir
How much milk in bottle Ambient temperature (22ºC) Fridge temperature (5ºC)
100 ml
150 ml
5 Minuten
7 Minuten
100 ml
240 ml
7 Minuten
8 Minuten
120 ml
360 ml
8 Minuten
10 Minuten
• Unscrew the water reservoir lid. Fill the water reservoir using the opening as
called for in the cooking guide on the next page.
• Screw down the water reservoir lid so that the colored oval on the plug lines
up with the mark on top of the steamer/blender.
• Swivel the lid clockwise and lift to remove.
• Put the feeding bottle to the steaming basket 2. Fix lid.
• If you wish to warm, reheating or defrosting big feeding bottles
• Fix the steaming basket 1 without the magic board on the base.
• Press
button, the light comes on. Select warming function , Then
press
to start. The max warming time is 30 mins; And the default setting
is 3mins; Also you can press the “increase” and “decrease”button to choose
the time you prefer.
• When warming is completed, the appliance beeps and the light goes off.