24
Special Instructions for Handling Your Device
Program Interruption
Once a program has begun, it can only be interrupted by lifting the lid of the device. If you want to continue
using the same program, put the lid back on and press the ON/OFF button. If you press the ON/OFF button
whilst a program is running, it will be erased. You will then need to start the program again.
IMPORTANT: If the lid is removed during operation, the blade will continue moving and the device will continue
cooking for a short time afterwards. Wait until all processes have stopped before proceeding.
Automatic transmission: If add some food which is heavy starchiness or heavy carbohydrate such as pota-
toes, butter/cream, sugar or the soup with flour, when choose Speed 1, the machine will change to speed 2
automatically when it detects the food stick. This can avoid the food over burned and the temperature of
each part of the food more even and taste more better.
Water Loss During Steaming
Duration
Filling Quantity
After Steaming
Water Loss
10 Minuten
375 ml
180 ml
200 ml
20 Minuten
2000 ml
1825 ml
175 ml
Reaction of Device to Extreme Amounts
Scenario
Reaction
More than 2 litres of water are brought
to a boil
Due to the strong development of vapour, it is possible that water
comes up through the cap and rubber seals
More than 2 litres of water are brought
to a boil using speed level 4
Increased vapor generation can lead to high-pitched whistling
sounds while large amounts of water pour out of the sides of the
device. If necessary, reduce the speed.
Exactly 2 litres of water are brought to
a boil
There is an increased amount of vapour.
Exactly 2 litres of water are brought to a
boil using speed level 4
Increased vapor generation can lead to high-pitched whistling
sounds. If necessary, reduce the speed.
Exactly 2 litres of water are mixed using
speed level 10
If the speed is too high, water will pour out of the sides of the
device. If necessary, reduce the speed.
WARNING
Risk of electric shock! Water that has leaked out can accumulate under the top section of the base.
To avoid electrical shock, always unplug the device before removing or cleaning parts.
