22
Changing the batteries of the remote control
The fire is supplied with an IR multifunction remote. Before the remote will operate the plastic insulating sheet needs to be
removed.
1. Locate and remove (2) the battery bracket (1).
2. The battery has two sides, one with a button feature, and the other is flat.
3. Insert the battery with the button side down into the battery bracket, making sure the battery is firmly seated.
Note: the battery should be removed if the product is to be left unused for a long period of time.
Safety Control (Thermal Cut-Out)
The unit has an overheat protection which is activated when the air inlets and outlets of the unit are blocked. Turn off the
power and unplug the appliance from the wall outlet. Leave the unit switched off for at least 10 minutes and make sure that
all blockages are removed. Now plug the mains plug back into the socket and switch on the appliance.