20
EN
FILTER INSTALLATION
1
2
3
Pull the front panel and
extract upward.
Turn the buckles and take
out both pieces of
filter.
Remove all packaging
bags. Put Filter 1
(Activated Carbon Filters)
back into the inside of the
product.
4
5
6
Put Filter 2 ( HEPA Filter)
back into the inner side
of the product. Please
ensure the tab side facing
you.
Make sure the filters are
installed in position.
Turn the buckles to fix the
filters.
To install the front panel,
put the bottom into the
host buckle and close the
front panel. The front panel
will be held with in-built
magnets.
